JC-10D Digital Process Monitor
The JC-10D Process Bar Graph Indicator and Alarm Monitor is a microprocessor based indicator alarm that can be field configured for a wide variety of applications including: Boiler Draft, Boiler Drum Level, Tank Levels, and Flow Rates.
The JC-10D Process Indicator is a microprocessor based indicator alarm that can be field configured for a wide variety of applications. The instrument provides a highly visible backlit LCD display with easy to understand bar graph, scaled numeric display, and front panel alarm messages. Bar Graph scaling, alarm setpoints, and time delays are all field selectable. Adjustments are made directly from the faceplate of the instrument by scrolling through a user friendly, English language menu. The unit is constructed of rugged polymer housing with a gasketed NEMA 4 faceplate.
• RS485 Modbus Communication
• 4-20 mADC Retransmission
• 4 Digit Display
• 200 Segment Bar Graph
• Large LCD Graphic Display
• Field Adjustable Using English Language Menus
• 2 SPDT Relays For Alarms and Events
• Flow Totalizer
Provide a remote reading, microprocessor-based Process Indicator and Alarm System to monitor [specify required monitoring point such as boiler draft, drum level, tank level, flow or pressure…]. The instrument shall provide a continuous numeric and 4", 0.5% resolution (minimum) bar graph display. The instrument shall contain: dual adjustment alarm setpoints with 10 amp. relay outputs, unique messages and manual reset pushbutton. The Instrument shall be field selectable as 2 or 4 wire 4-20 mADC, 10k Thermistor, J or K Thermocouple, Potentiometer, 0-2.5 VDC, or Pulser. The Instrument shall provide cold junction, and upscale thermocouple break protection for thermocouples, 4-20 mADC and RS485 Modbus remote output signals. The housing shall be panel mountable, fully gasketed with a NEMA 4 front face. All adjustments shall be made from the front panel display in engineering units. No external configurator or laptop shall be required. The instrument shall be manufactured and labeled in accordance with UL508 requirements (CSA C22.2 #14 for use in Canada). Inspection and labeling shall be supervised by UL or other OSHA approved Nationally Recognized Test Lab (NRTL). Indicator and Alarm System shall be Preferred Instruments, Danbury, CT, Model JC-10D.
All information sourced from Preferred Instruments.
For more information please click on the following link, Preferred Instruments Back